RK1-PT Concrete Road Milling Bits Akan 100HP 300HP Milling Machines
RK1-PT Concrete Road Milling Bits Akan 100HP 300HP Milling Machines
Bayani
| Nau'in: | Kankare Hanya Milling Bits | Wani Suna: | Zaɓuɓɓukan Yankan Kennametal |
|---|---|---|---|
| Abun Tukwici: | Tungsten Carbide | Diamita Shank: | 20mm ku |
| Diamita Tukwici: | 10 mm | Siffar Tukwici: | Silindrical |
| Aikace-aikace: | Gyaran Titin Kankare | Nau'in Inji: | 100-300 Karamin Injin Niƙa |
| Babban Haske: | RK1-PT Concrete Road Milling Bits, 100HP Road Milling Bits, 300HP Milling Machines yankan rago | ||
RK1-PT Concrete Kennametal Mai Shirye-shiryen Hanyar Hanyar Milling Bits akan 100-300HP Karamin Injin Niƙa
1. Hanya Milling Bits Bayanin
Har ila yau ana san su da ƙwalta da yankan kankare, da na'urar tsara hanya, da injinan yankan haƙoran hanya, waɗanda ake amfani da su azaman saɓanin na'urar niƙa hanya wajen gina titinan.Ana shigar da Bit a cikin ganga mai niƙa na injin niƙa kuma a yanke saman hanya.Ragowar suna da nau'i biyu, kwalta kwalta da siminti.Ana amfani da nau'i-nau'i daban-daban a kan nau'o'in tarawa daban-daban da kuma nau'in niƙa daban-daban.
Jikin Karfe, wanda aka yi ta kayan ASTM4142 ko 42CrMo, magani mai zafi tare da taurin 40-44HRC, yana da babban ƙarfi da halayen sawa.Tukwici tare da taurin HRC sama da 50 an yi shi ne daga ƙananan fasahar sintered ɗin latsawa, girman tip ɗin carbide da sa zai bambanta don tabbatar da ingantaccen aikin niƙa da rayuwa.
SRK1-PT shine tip ɗin carbide na silinda don cire kankare, ɗauki kai tare da tsagi mai cirewa azaman taimakon wargajewa.The shank diamita ne 20mm, carbide tip diamita ne 10mm, bayar da shawarar ga matsakaici m inji na Wirtgen, Dynapac, Cat, Kennametal da Sanvik.
2. Carbide Milling Bits Specificification
| Nau'in | Ma'ana
|
| Saukewa: SRK1-PT | Idan aka kwatanta da Kennametal RK1-PT, Cat 561-8132
|
| Appliciaton | Cylindrical caride tip don cire Kankare.
|
| Shank Diamita | An gudanar da shi a cikin ɗigon kayan aiki tare da diamita na 20mm
|
| Nauyin Carbide a kowane zaɓi | 24g ku
|
| Adadin kowane akwatin kayan aiki | guda 50
|
| Nauyi kowane akwatin kayan aiki | 14kg
|
3. Lissafin Zaɓen Hanyar Niƙa
| Lambar Lamba
| Carbide Shpae | Nauyin Carbide | Girman Tukwici | Abubuwan da za a Niƙa | Nau'in Inji |
| SRK301 | Kafa Siffa | 30.8g ku | 10 x 19mm | Kwalta | 100-300HP Milling Machine |
| SRK403 | Kafa Siffa | 36g ku | 12 x 19mm | Kwalta | 300-1000HP Babban Injin Niƙa |
| SRK504 | Kafa Siffa | 41g ku | 11 x 21mm | Kwalta | 300-1000HP Babban Injin Niƙa |
| SRK101 | Kafa Siffa | 20 g | 9 x16m ku | Kwalta | 100HP da Ƙananan Injin Milling |
| Saukewa: SRK1PT | Toshe Siffar | 24g ku | 10 mm | Kankare | 100-300HP Milling Machine |
| Saukewa: SRK3PT | Toshe Siffar | 38g ku | 13mm ku | Kankare | 300-1000HP Babban Injin Niƙa |
4. Halin Tukwici Na Niƙa Carbide
- A yi amfani da niƙan hanya, gyaran ƙasa, yankan kwalta da siminti
- kayan jikin hakori shine 40CrMo ko mafi kyau, tsarin mashin ɗin ƙirƙira ne
- daban-daban zane za a iya amfani da mafi yawan yankan yanayi
- Ƙirƙirar samfurori da samfura masu sauri
- Ana amfani da tukwici na carbide mai tsabta don babban ƙarfi
- Tsayawa mai tsayi, ingancin tungsten carbide mara ƙarfi wanda aka samar ta ainihin tsari wanda ya samo asali daga gogewar shekaru
- Kayan aikin samarwa da matakai na musamman sun haɓaka zuwa matuƙar kamala ta hanyar ƙwararrun masana a cikin hadakar tungsten carbide da karfe.
5. Tsarin Zabar Carbide
1. Ingantaccen rarraba carbide, ma'auni mai ma'ana na tungsten cobalt gami don tabbatar da juriya da juriya na yanke yanke.
2. Madalla da kwarara solder don tabbatar da weld ƙarfi.
3. M karfe jiki geometry, musamman zane na jiki don inganta yadda ya dace da ja da baya, don tabbatar da m juyawa, sabon zafi magani tsari don tabbatar da lalacewa juriya da karaya juriya na cutter shank.
4. Ƙarfafa lalacewa tare da ingantaccen siffar, ƙirar gasket mai kauri, tabbatar da tsawon rayuwar mai riƙe da kayan aiki.
5. Thickening da hannun riga, tabbatar da matsakaicin tashin hankali da clamping karfi, sauki shigarwa da kuma cire.
6. Nau'in Injin Milling
SRK1-PT jerin milling ragowa yadu amfani a kan Wirtgen kananan niƙa inji kazalika da m injin niƙa, kamar W35DC, W35Ri, W50, W50H, W55H, W50DC, W50R, W60R, W60, W100, W100R, W100FH, W130H W120F, W130F, W100CF, W120CF, W130CF, W150, W150CF.
