RK3-01 44 HRC 19mm x 10mm Gyaran Hanya Milling Bits
RK3-01 44 HRC 19mm x 10mm Gyaran Hanya Milling Bits
Bayani
| Nau'in: | Hanyar Milling Carbide Bits | Wani Suna: | Conicals na Gyaran Titin King Road |
|---|---|---|---|
| Abun Tukwici: | Tungsten Carbide | Shank Material: | 42CrMo |
| Diamita Shank: | 20mm ku | Tsari: | Ƙirƙira |
| Siffar Tukwici: | Kafa Siffar | Aikace-aikace: | Cire Layer Kwalta Akan 100-300 HP Milling Machine |
| Babban Haske: | 44 HRC Gyaran Niƙa Bits, RK3-01 Gyaran Hanya Milling Bits, 19mm x 10mm Gyaran Niƙa Bits | ||
Tips SRK301 Kwalta Hanyar Niƙa Tips Kennametal Rehailitation Conicals Bits
1. Hanya Milling Bits Bayanin
Har ila yau ana san su da ƙwalta da yankan kankare, da na'urar tsara hanya, da injinan yankan haƙoran hanya, waɗanda ake amfani da su azaman saɓanin na'urar niƙa hanya wajen gina titinan.Ana shigar da Bit a cikin ganga mai niƙa na injin niƙa kuma a yanke saman hanya.Ragowar suna da nau'i biyu, kwalta kwalta da siminti.Dangane da taurin hanya daban-daban tare da ragowa daban-daban.
Alloy karfe Jikin, sanya ta abu ASTM4142 ko 42CrMo, zafi magani tare da 40-44HRC taurin, yana da high taurin da wearable hali.Tip tare da sama 50 HRC taurin an yi daga Low latsa Sintered, kuma Dace Grade zaba bisa ga Target Projects, wanda don tabbatar da kyakkyawan aiki yayin aiki.
SRK301 shine tip carbide mai siffar hula don cire kwalta yadudduka, ɗauki kai tare da tsagi mai cirewa azaman taimakon wargajewa.The shank diamita ne 20mm, carbide tip diamita ne 19mm x 10mm, bayar da shawarar ga 100-300-1000HP matsakaici milling inji na Wirtgen, Dynapac, Cat, Kennametal da Sanvik.
2. Milling Bits Musammantawa
| Nau'in | Ma'ana
|
| SRK301 | Idan aka kwatanta da KennaMetal RK3-01, Cat 5784416
|
| Appliciaton | Tushen caride mai siffar hula don cire kwalta yadudduka. |
| Shank | An gudanar da shi a cikin ɗigon kayan aiki tare da diamita na 20mm |
| Nauyin Carbide a kowane zaɓi | 30g ku
|
| Adadin kowane akwatin kayan aiki | guda 50
|
| Nauyi kowane akwatin kayan aiki | 17kg
|
3. Road Milling Bits List
| Lambar Lamba
| Carbide Shpae | Nauyin Carbide | Girman Tukwici | Abubuwan da za a Niƙa | Nau'in Inji |
| SRK301 | Kafa Siffa | 30.8g ku | 10 x 19mm | Kwalta | 100-300HP Milling Machine |
| SRK403 | Kafa Siffa | 36g ku | 12 x 19mm | Kwalta | 300-1000HP Babban Injin Niƙa |
| SRK504 | Kafa Siffa | 41g ku | 11 x 21mm | Kwalta | 300-1000HP Babban Injin Niƙa |
| SRK101 | Kafa Siffa | 20 g | 9 x16m ku | Kwalta | 100HP da Ƙananan Injin Milling |
| Saukewa: SRK1PT | Toshe Siffar | 24g ku | 10 mm | Kankare | 100-300HP Milling Machine |
| Saukewa: SRK3PT | Toshe Siffar | 38g ku | 13mm ku | Kankare | 300-1000HP Babban Injin Niƙa |
4. Tsarin Zabar Carbide
1. Matsakaicin ma'auni na tungsten cobalt gami don tabbatar da juriya da juriya na yanke yanke.
2. Madalla da kwarara solder don tabbatar da weld ƙarfi.
3. Na musamman zane na jiki don inganta yadda ya dace na ja da baya, don tabbatar da m juyawa, sabon zafi magani tsari don tabbatar da lalacewa juriya da karaya juriya na cutter shank.
4. Tsarin gasket mai kauri, tabbatar da tsawon rayuwar mai ɗaukar kayan aiki.
5. Thickening da hannun riga, tabbatar da matsakaicin tashin hankali da clamping karfi, sauki shigarwa da kuma cire.
5. Nau'in Injin Milling
Ana iya amfani da SRK301 akan injunan niƙa 100-300 HP, kamar W100F, W120F, W130F, W100CF, W120CF, W130CF, W150, W150CF.
Rukunin samfuran
-
Babban Madaidaicin Layi Traffic Loop Sawing Walk ...
-
Table Miter Saw Carbide Tipped 12 inch itace Yanke...
-
1-1/4-7 UNC Namiji Zuwa 1/2 BSP Namiji Musanya Diamo...
-
ISO9001 355mm Carbide Tipped madauwari Saw Blade
-
W6 G/20 20mm Shank Cap Siffar Kwalta Road Mill...
-
Rough Artificial Quartz Stone Slab Diamond Fick ...
