18mm Tukwici Kwalta Pavement Cire W5 G20 Road Milling Bits
18mm Tukwici Kwalta Pavement Cire W5 G20 Road Milling Bits
Bayani
| Nau'in: | Hanyar Milling Carbide Zaɓan/Bits/Nasihu | Wani Suna: | Zaɓin Yankan Wirtgen |
|---|---|---|---|
| Abun Tukwici: | Tungsten Carbide | Diamita Shank: | 20mm ku |
| Diamita Tukwici: | 18mm ku | Siffar Tukwici: | Siffar hula |
| Aikace-aikace: | Cire Layer Asphalt | ||
| Babban Haske: | W5 G20 Road Milling Bits, SinoDiam yanke zaɓe, 18mm Tip Road Milling Bits | ||
W5-G/20 Tafarkin Kwalta Yana Cire Zaɓan Yankan Yankan Wirtgen
1. Hanya Milling Bits Bayanin
Har ila yau ana san su da ƙwalta da yankan kankare, da na'urar tsara hanya, da injinan yankan haƙoran hanya, waɗanda ake amfani da su azaman saɓanin na'urar niƙa hanya wajen gina titinan.Ana shigar da Bit a cikin ganga mai niƙa na injin niƙa kuma a yanke saman hanya.Ragowar suna da nau'i biyu, kwalta kwalta da siminti.Dangane da taurin hanya daban-daban tare da ragowa daban-daban.
Alloy karfe Jikin, sanya ta abu ASTM4142 ko 42CrMo, zafi magani tare da 40-44HRC taurin, yana da high tauri da wearable hali.Tip tare da sama 50 HRC taurin an yi daga Low latsa Sintered, kuma Dace Grade zaba bisa ga Target Projects, wanda don tabbatar da kyakkyawan aiki yayin aiki.
SW5/20 shine tip carbide mai siffar hula don cire kwalta yadudduka, ɗaukar kai ba tare da ko tare da tsagi mai cirewa azaman taimakon wargajewa ba.Diamita na shank shine 20mm, girman carbide shine 18 x 18 x 10mm, ba da shawarar ga 1m na ƙananan injunan niƙa na Wirtgen, Dynapac, Cat, Kennametal da Sanvik.
2. Ƙayyadaddun bayanai
| Nau'in | Ma'ana
|
| SW6/20 | Idan aka kwatanta da Wirtgen W5-G/20X2
|
| Appliciaton | Tushen caride mai siffar hula don cire kwalta yadudduka. |
| /20 | An gudanar da shi a cikin ɗigon kayan aiki tare da diamita na 20mm |
| Nauyin Carbide a kowane zaɓi | 26g ku
|
| Adadin kowane akwatin kayan aiki | guda 50
|
| Nauyi kowane akwatin kayan aiki | 16kg
|
3. Jerin Zaɓen Ƙaƙwalwar Titin Niƙa
4. Tsarin Zabar Carbide
5. Milling inji Nau'in
W5-G / 20 za a iya amfani da W60 W100 (L), W100 (H), W100R, W130H jerin milling inji.
