IS09001 W4 G20 Gyaran Titin Tungsten Carbide Bits
IS09001 W4 G20 Gyaran Titin Tungsten Carbide Bits
Bayani
| Nau'in: | Hanyar Milling Carbide Zaɓan/Bits/Nasihu | Wani Suna: | Conicals Gyaran Hanya Don Yanke |
|---|---|---|---|
| Abun Tukwici: | Tungsten Carbide | Shank Material: | 42CrMo |
| Diamita Shank: | 20mm ku | Diamita Tukwici: | 16mm ku |
| Siffar Tukwici: | Kafa Siffar | Aikace-aikace: | Don Yankan Kwalta Akan Kananan Injinan Niƙa |
| Babban Haske: | W4 G20 Carbide Bits, IS09001 W4 G20 Tungsten Carbide Bits, SinoDiam yanke shawara | ||
W4/20 Fitar Siffar Carbide Tukwici Na Niƙa Zaɓa Don Cire Lambun Kwalta
1. Hanya Milling Bits Bayanin
Har ila yau ana san su da ƙwalta da yankan kankare, da na'urar tsara hanya, da injinan yankan haƙoran hanya, waɗanda ake amfani da su azaman saɓanin na'urar niƙa hanya wajen gina titinan.Ana shigar da Bit a cikin ganga mai niƙa na injin niƙa kuma a yanke saman hanya.Ragowar suna da nau'i biyu, kwalta kwalta da siminti.Dangane da taurin hanya daban-daban tare da ragowa daban-daban.
Alloy karfe Jikin, sanya ta abu ASTM4142 ko 42CrMo, zafi magani tare da 40-44HRC taurin, yana da high taurin da wearable hali.Tip tare da sama 50 HRC taurin an yi daga Low latsa Sintered, kuma Dace Grade zaba bisa ga Target Projects, wanda don tabbatar da kyakkyawan aiki yayin aiki.
Muna ba da zaɓen niƙan hanya don yanke kwalta da titin kankare, niƙa niƙa daga 0.5m-2m.Dace da Wirtgen, Dynapac, Cat, Kennametal da Sanvik construciton inji.
SW4/20 shine tip carbide mai siffar hula don cire kwalta yadudduka, ɗauki kai tare da tsagi mai cirewa azaman taimakon wargajewa.The shank diamita ne 20mm, carbide size ne 16 x 16 x 9mm, bayar da shawarar ga 0.35m, 0.5m da 1m raya kananan niƙa inji.
2. Ƙayyadaddun bayanai
| Nau'in | Ma'ana
|
| SW6/20 | Idan aka kwatanta da Wirtgen W4/20X2
|
| Appliciaton | Tushen caride mai siffar hula don cire kwalta yadudduka. |
| /20 | An gudanar da shi a cikin ɗigon kayan aiki tare da diamita na 20mm |
| Nauyin Carbide a kowane zaɓi | 20 g
|
| Adadin kowane akwatin kayan aiki | guda 50
|
| Nauyi kowane akwatin kayan aiki | 15kg
|
3. Jerin Zaɓen Ƙaƙwalwar Titin Niƙa
4. Tsarin Zabar Carbide
5. Milling inji Nau'in
Ana iya amfani da W4-G/20 akan W35DC, W35Ri, W50, W50H, W555H, W50DC, W50R, W60R, W60 W100(L), W100(H), W100R, W130H.
